大家好,有一个范围54825A,当它尝试启动我看到内存测试完成后,在IDE-0上找到硬盘然后启动Windows 98 ....并在此处停止。
因此安装Windows或使用HDD需要恢复它。
在本指南http://www.keysight.com/upload/c ... UpgradeRecovery.pdf我的模型有方法恢复与软盘的数量,但提到链接到ftp实用程序位于ftp:/ ft
/ftp.agilent.com/pub/callpub1/ddt/scope/548xx/Upg_Rec/3_72/3_72_upg.exe不存在此类位置有人可以将此文件或链接发送给我,我可以将其下载。
TKS
以上来自于谷歌翻译
以下为原文
Hi All,
have a scope 54825A and when it try to boot i see that memory test is done, found HDD on IDE-0 and then
Starting Windows 98....
and stopped here.
So something with Windows installed or with HDD and need to recover it.
In this guide http://www.keysight.com/upload/c ... UpgradeRecovery.pdf
for my model there is way to recover with number of the floppy disks but mentioned link to ftp where utility is located is broken ftp://ftp.agilent.com/pub/callpu ... c/3_72/3_72_upg.exe
not exist such location
Can somebody send me this file or link where i can download it.
Tks
试试这个链接:ftp://ftp.keysight.com/callpub3/ddt/scope/548xx/Upg_Rec/3_72/ FYI ... 54825A是一个非常古老的范围。
它在2006年“失去了支持”。不能保证这些文件会留在那里。
我很惊讶他们在那里...... Al
以上来自于谷歌翻译
以下为原文
Try this link:
ftp://ftp.keysight.com/callpub3/ddt/scope/548xx/Upg_Rec/3_72/
FYI... The 54825A is a VERY old scope. It went 'out of support' in 2006. There's no guarantee that these files will be staying around. I'm surprised that they are there at all...