完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,我想了解一些事情。
我正在使用带有s1p文件的数据项进行S参数模拟。 该文件仅包含端口1的反射参数S11。但在模拟结束时,我可以看到ADS也在绘制S21。 那是什么意思? 如果文件中不存在S21数据,它如何导出S21数据。 谢谢,Wasim 以上来自于谷歌翻译 以下为原文 Hi, I want to understand something. I am doing S-parameter simulation using data items with s1p file. the file contains only reflection parameter S11 from port 1. But at the end of simulation I can see ADS is plotting S21 as well. What does that mean? How it is deriving S21 data if there is no S21 data present in the file. Thanks, Wasim |
|
相关推荐
1个回答
|
|
没有看到你的设置,我将不得不推测。
一些S参数仿真模板具有数据显示,始终假设您的仿真生成了2端口S参数。 如果原理图有两个Term组件,那么它将生成一个带有2端口S参数的数据集。 s1p组件可用于读入1端口数据,然后可用于许多不同的模拟,包括2端口或多端口S参数模拟。 以上来自于谷歌翻译 以下为原文 Without seeing your setup, I'll have to speculate. Some of the S-parameter simulation templates have data displays that always assume your simulation has generated 2-port S-parameters. If your schematic has two Term components then it will generate a dataset with 2-port S-parameters. An s1p component can be used to read in 1-port data that can then be used in many different simulations, including a 2- or multi-port S-parameter simulation. |
|
|
|
只有小组成员才能发言,加入小组>>
小黑屋| 手机版| Archiver| 电子发烧友 ( 粤ICP备14022951号 )
GMT+8, 2023-5-18 23:42 , Processed in 0.827416 second(s), Total 119, Slave 103 queries .
Powered by 电子发烧友网
© 2015 www.ws-dc.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:粤 B2-20160233 工商网监 粤ICP备 14022951 号