完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
大家好,
我使用的是SPC560B54L5 Discovery板(SPC560B-Discovery),SPC5studio版本5.2.3和UDE Visual Platform 4.2版本。 当我尝试加载应用程序时,.elf工作正常。如果我尝试使用.hex或.bin文件(根据我的要求) 我面临以下问题, 当我尝试加载''.hex''文件时,代码会成功加载,但在运行时会抛出一个错误,因为''Unknown Break cause''。同样,当我尝试加载''.bin''文件时,它会提示“未知文件格式”错误。 请建议我是否需要对IDE(或)UDE中的设置或首选项进行更改 问候, R.santhamurthy 以上来自于谷歌翻译 以下为原文 Hello All, I am using SPC560B54L5 Discovery board(SPC560B-Discovery), SPC5studio version 5.2.3 and UDE Visual Platform 4.2 version. When I try to load the application the .elf is working fine. If i try to make use of .hex or .bin file (as per my requirement) I am facing following problems, When I try to load ''.hex'' file the code gets loaded successfully but while running it is throwing an error as '' Unknown Break cause''. Similarly, when I try to even load ''.bin'' file it prompts with ''Unknown File Format'' error. Kindly suggest if I need to do the changes to the settings or preferences in IDE (or) UDE Regards, R.santhamurthy |
|
相关推荐
1个回答
|
|
亲
R.santhamurthy ,PLS UDE是调试器 您无法通过hex文件进行调试并添加一些断点 如果要调试,则必须使用符号文件。 PLS UDE使用Memtool在flash中加载你的hex文件。 最好的祝福 二万 以上来自于谷歌翻译 以下为原文 Dear R.santhamurthy ,PLS UDE is debugger You can not debug by a hex file and put some breakpoints if you want to debug , you have to use the symbol file. PLS UDE is using Memtool to load in the flash your hex file. Best Regards Erwan |
|
|
|
只有小组成员才能发言,加入小组>>
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
64浏览 3评论使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
56浏览 3评论小黑屋| 手机版| Archiver| 电子发烧友 ( 粤ICP备14022951号 )
GMT+8, 2023-7-10 13:30 , Processed in 0.568686 second(s), Total 76, Slave 63 queries .
Powered by 电子发烧友网
© 2015 www.ws-dc.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:粤 B2-20160233 工商网监 粤ICP备 14022951 号