完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
到目前为止,我们有一些适用于每个ENA分析仪的软件,但是我们刚刚接收了E5080A,并且许多命令似乎已经改变,例如:在所有其他ENA上,将扫描时间设置为
5秒,你会在E5080A上使用它:SENS:SWE:DEL 5,你会使用它:SENS:SWE:tiME 5这个新的命令集是否会成为ENA分析仪向前发展的新标准,或者这只是 E5080A的一次性使用? 以上来自于谷歌翻译 以下为原文 We have some software that has worked with every ENA analyzer up till now, however we just took delivery of a E5080A, and many of the commands seem to have changed, one example is this: On all other ENA's, to set the sweep time to 5 seconds, you would use this: SENS:SWE:DEL 5 on the E5080A, you would use this: SENS:SWE:TIME 5 Is this new command set going to be the new standard for ENA analyzers moving forward, or is this just a one-off for the E5080A? |
|
相关推荐
2个回答
|
|
E5080A基于是德科技新推出的通用VNA平台,该平台将用于Keysight新推出的VNA型号(PNA,ENA,PXI VNA,......)。
这些新的VNA产品的SCPI命令,包括E5080A,与现有的PNA的SCPI命令基本相同或相似。 Yasuhiro Mori / Keysight Technologies 以上来自于谷歌翻译 以下为原文 The E5080A is built on Keysight's new common VNA platform, which will be commonly used for Keysight's new VNA models coming from now (PNAs, ENAs, PXI VNAs, ...). And the SCPI commands of these new VNA products, including the E5080A, are basically same as or similar to the existing PNA's SCPI commands. Yasuhiro Mori / Keysight Technologies |
|
|
|
huazhe 发表于 2018-10-2 13:16 感谢您的答复。 这是否意味着任何新的6和7系列ENA型号也会使用这个标准命令集? 以上来自于谷歌翻译 以下为原文 Thank you for the reply. Does this mean that also any new 6 and 7 series ENA models will also use this standard command set too? |
|
|
|
只有小组成员才能发言,加入小组>>
1927 浏览 1 评论
1702 浏览 1 评论
1499 浏览 5 评论
2364 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1359 浏览 4 评论
1386浏览 0评论
1127浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
96浏览 0评论
2096浏览 0评论
943浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 粤ICP备14022951号 )
GMT+8, 2023-7-30 10:13 , Processed in 0.590783 second(s), Total 63, Slave 58 queries .
Powered by 电子发烧友网
© 2015 www.ws-dc.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:粤 B2-20160233 工商网监 粤ICP备 14022951 号